Can You Apply Polyurethane With A Roller? Are you wondering? The answer is yes. Let's find out what it is! Polyurethane (PU) is currently a "hot" material that is widely used for its high strength and resistance to environmental aggressors: oxidation, sunlight, ozone, and common weather conditions.

global polyurethane foam market

It is often used as a coating material on the exterior of surfaces to protect the materials.

There are many questions about this PU material.

So how to apply polyurethane with a roller and all the related questions? All will be dealt with immediately below this article.

On This Page

  • How To Apply Polyurethane With a Roller?
    • 1. Prepare
    • 2. Conduct Coating
    • 3. End of The Process
  • Common Asked Question About "Can You Apply Polyurethane With a Roller?"
    • 1. Can a Roller Be Used For Oil-Based Polyurethane?
    • 2. Is It Okay To Use Polyurethane With a Foam Roller?
    • 3. Can You Apply Water-Based Polyurethane With a Roller?
    • 4. Can You Apply Oil-Based Polyurethane With a Foam Roller?
    • 5. Is The Use Of Foam Rollers For Water-Based Polyurethane Effective?
    • 6. Can The Paint Roller Be Used For Polyurethane?
  • Conclusion

Related:

  • Can You Mix Wood Stain With Polyurethane?
  • Can You Use Water Based Polyurethane Over Oil Based Polyurethane?
  • How to Roll on Polyurethane?
  • Trying to apply polyurethane

How To Apply Polyurethane With a Roller?

Can You Use a Roller To Apply Polyurethane

1. Prepare

Tooling and material preparation plays an important role. The tools you need are

  • Polyurethane

Depending on the purpose of using on which surface you prepare from 1 to 3 Polyurethane bottles.

You can easily buy them at any construction material store or you can check them on Amazon
Some recommendations for you

    • Minwax 63010444 Fast Drying Clear Finish, quart, Satin
    • Minwax Satin 356050000 One Coat Quart
    • Varathane 200061H Water-Based Ultimate, Half Pint, Gloss Finish, 8 Fl Oz
    • ZAR 33912 Oil-Based Wood Finish, QT
    • Minwax 230004444 Fast Drying Gloss, 1/2 pint
  • Roller

The size of the Roller depends on the surface you want to cover.

If you are PU coated with a small area, you can use a small roller, and with a larger surface area, you need a large. We recommend: Round Foam Roller, 12″, 18″, 24″, 36″

  • Waterproof gloves

Prepare a pair of waterproof gloves with a thick rubber material. Gloves will protect your hands from harmful substances. We recommend: Vgo 15-Pairs Polyurethane Coated Gardening and Work

  • Paint Pans

You need 2 paint pans to easily mix PU and use them easily.

  • Mask

Mask help protect your lungs when applying PU.

  • Goggles

Helps protect your eyes.

  • Sandpaper

Used for sanding after the first layer of PU dries.

  • Protective Clothing

You need a thick protective suit to protect your body.

2. Conduct Coating

Can I Apply Polyurethane With a Roller

  • Step 1:

You can Apply Polyurethane With A Roller. But before you do, wear protective gear, rubber gloves, glasses, and masks and be ready to go.

  • Step 2:

You need 2 paint pans. With paint pan No. 1, you pour into 2 glasses of brandy. 2nd paint pans you to polyurethane.

You should put these 2 paint pans next to each other to paint faster.

  • Step 3:

Moisten the roller by immersing it in mineral water

  • Step 4:

After the roller has been dampened with mineral water, immediately immerse it in the polyurethane paint pan with the brandy paint pan.

Be careful not to pour mineral water into your PU pan as this will dilute it.

  • Step 5:

Roll over the surface or area you want to cover.

Roll rapidly over the material and cover the surface or area until rollers no longer contain PU.

  • Step 6:

Dip more polyurethane and continue rolling.

After finishing the first coat, allow to air dry according to PU instructions.

  • Step 7:

Use sandpaper and sand the first dry coating before You Apply Polyurethane 2nd to the surface.

Remove dirt around the surface with a damp cloth.

  • Step 8:

Proceed to wash the roller. Dip it in mineral water, wash off the paint and wring out moisture.

  • Step 9:

Repeat steps 2 through 8 to on the surface or area you want to cover until completed.

3. End of The Process

Can You Apply Oil Based Polyurethane With a Roller

Step 1

To make sure the roller is clean of PU and minerals, you should rinse it under hot running water.

Step 2

Cover the used paint pan with a plastic bag then put it in the trash in the right place.

If you want to reuse the paint pan, you can use a sharp metal to clean the paint pan, then rinse the pan under hot running water.

Step 3

The rest of the polyurethane that remains is poured into the thick metal box and tightly closed.\

Common Asked Question About "Can You Apply Polyurethane With a Roller?"

roller paint brush

1. Can a Roller Be Used For Oil-Based Polyurethane?

This type can be used if the PU contact surface is a parquet surface. With this oil-based roller, you also use it by wetting it.

The oil base turns slightly amber.

It dries more slowly than water-based so there is a longer waiting time between coats. When finishing, you clean the objects with mineral water.

2. Is It Okay To Use Polyurethane With a Foam Roller?

You can use this.

However, for the contact surface to always be smooth and free of floating particles, when handling the paint pan containing PU, you stir well until no bubbles appear.

3. Can You Apply Water-Based Polyurethane With a Roller?

When you open the Water-based PU paint box, you will see it in the form of milk in a can.

Don't worry because when it comes into contact with surfaces, it will turn transparent back.

Very suitable if you want to keep the original color of the wood.

It contains more water than oil-based Polys, so you need more coats. Drying time is also very fast so you don't need to wait too long.

Clean tools with soap and water. Do not use a detergent that contains ammonia.

4. Can You Apply Oil-Based Polyurethane With a Foam Roller?

When applying oil-based it to your surface. The foam works well and is easy to clean as well. The cost of buying is quite cheap, so you can only use it once.

You paint oil in the first layer with a thick layer then thin in subsequent layers until finished.

5. Is The Use Of Foam Rollers For Water-Based Polyurethane Effective?

You can use it. However, you should pay attention to the drying times of the water-based polyurethane layer.

The first layer, while waiting for the PU contact surface to dry, clean it, and keep moisture.

After the first coat, sandpaper and continue until finished.

6. Can The Paint Roller Be Used For Polyurethane?

The answer is you can apply polyurethane with a paint roller.

Because PU can be easily applied to the contact surface by both roller and brush.

With this paint roller, you should choose the right size for the contact surface to conduct paint more effectively.

Conclusion

Wooden surfaces of your house such as wardrobes, tables, chairs, beds… can you apply polyurethane with a roller.

It not only helps to protect the contact surface, keep your items longer, but also ensure aesthetically beautifying them.

Follow the steps fully and you will have the perfect PU coated surface. If you still do not know where to buy PU, you can refer to the link Amazon.com to choose for yourself the right product. Good luck to you!

Further Reading:

  • What Is The Best Finish For Wooden Kitchen Worktops?
  • Best Finish For Outdoor Wood Sign

Tags: foam brush, oil based finish, mineral spirits, wood floor, lint free, applying finish, apply polyurethane finish, bristle brush, hardwood floor, water based poly, smooth finish, flat surfaces